Water Injection
0 failure reports named the water injection in the last ten years, 3 since 2003. 4 FAA approvals let 2 companies make a replacement water injection, Honeywell International INC. holding the most (2).
Reports by year
Reports by year, as a table
| reports | |
|---|---|
| 2003 | 2 |
| 2004 | 1 |
Approved replacement parts 4 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a water injection and sell it as an approved part for the models named. These are the companies holding such approvals for a water injection:
For these models most: Boeing 747 (2), Boeing 737 (2).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Honeywell International INC. | Water Injection Valve 602V100-4 | 60B90126-4 | The Boeing Company 747-100 Series, 747-200B Series,... | 2023-02-09 | current |
| Honeywell International INC. | Water Injection Nozzle 2214275-1 | 2214275-1 | The Boeing Company 737-400 Series, 737-800 Series,... | 2023-01-20 | current |
| Honeywell International INC | Water Injection Nozzle 2214275-1 | 2214275-1 | Boeing 737-400 Series, 737-800 Series,... | 2001-10-29 | current |
| Honeywell International INC | Water Injection Valve. 602V100-4 | 60B90126-4 | Boeing 747-100 Series, 747-200B Series,... | 2000-02-24 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.