Servo Stop
0 failure reports named the servo stop in the last ten years, 1 since 1996. 3 FAA approvals let 1 company make a replacement servo stop, Garmin International INC holding the most (3).
Reports by year
Reports by year, as a table
| reports | |
|---|---|
| 1996 | 1 |
Approved replacement parts 3 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a servo stop and sell it as an approved part for the models named. These are the companies holding such approvals for a servo stop:
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Garmin International INC | Servo Stop, LH 115-04355-00 | Modification Part | Textron Aviation Inc. Refer to STC SA01535WI-D | 2023-09-25 | current |
| Garmin International INC | Servo Stop Ring 115-04380-00 | Modification Part | Textron Aviation Inc. Refer to STC SA01535WI-D | 2023-09-25 | current |
| Garmin International INC | Servo Stop, RH 115-04355-01 | Modification Part | Textron Aviation Inc. Refer to STC SA01535WI-D | 2023-09-25 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.