Rotor Blade
0 failure reports named the rotor blade in the last ten years, 1 since 1997. 4 FAA approvals let 2 companies make a replacement rotor blade, Rotech INC holding the most (2).
Reports by year
Reports by year, as a table
| reports | |
|---|---|
| 1997 | 1 |
Approved replacement parts 4 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a rotor blade and sell it as an approved part for the models named. These are the companies holding such approvals for a rotor blade:
For these models most: Bell 206 JetRanger and LongRanger (4).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Bell Helicopter Textron INC (Formerly Aeronautical Accessories INC) | Rotor Blade Weight 700-214-001 | Bell 206-010-214-003 | Bell 206A, 206B | 2000-06-28 | current |
| Bell Helicopter Textron INC (Formerly Aeronautical Accessories INC) | Rotor Blade Tip Cap 700-210-101 | Bell 206-010-210-005 | Bell 206A, 206B | 2000-06-28 | current |
| Rotech INC | Rotor Blade Tip Cap in accordance with part number... RT2000 | Modification Part | Bell 206B | 1996-01-31 | current |
| Rotech INC | Rotor Blade Tip Cap in accordance with part number... RT1500LJ | Modification Part | Bell 206L, L1, L3 | 1996-01-31 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.