Roller Bracket
0 failure reports named the roller bracket in the last ten years, 1 since 1996. 4 FAA approvals let 2 companies make a replacement roller bracket, Garmin International INC holding the most (3).
Reports by year
Reports by year, as a table
| reports | |
|---|---|
| 1996 | 1 |
Approved replacement parts 4 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a roller bracket and sell it as an approved part for the models named. These are the companies holding such approvals for a roller bracket:
For these models most: Cessna T182 Turbo Skylane (1), Cessna 182 Skylane (1), Cessna 172 Skyhawk (1), Boeing 747 (1).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Garmin International INC | Roller Bracket 115-03271-00 | Modification Part | See Approved Model... See Approved Model List for STC SA01866WI | 2019-07-16 | current |
| Garmin International INC | Roller Bracket, Match Drill Flange, PMA 115-02986-00 | Modification Part | See Approved Model... See Approved Model List for STC SA01866WI | 2018-11-01 | current |
| Garmin International INC | Roller Bracket 115-02910-00 | Modification Part | Textron Aviation Inc. 172F (USAF T-41A), 172G, 172H (USAF T-41A) | 2018-03-25 | current |
| Harper Engineering | Roller Bracket H3-1406-11 | H3-1406-11 | Boeing 747-400 SERIES 747-400D SERIES | 2008-11-25 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.