Pad Detail
No failure report names the pad detail. 6 FAA approvals let 3 companies make a replacement pad detail, Vaupell Northwest Molding and Tooling holding the most (2).
Approved replacement parts 6 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a pad detail and sell it as an approved part for the models named. These are the companies holding such approvals for a pad detail:
For these models most: Boeing 757 (6), Boeing 737 (6).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Vaupell Northwest Molding and Tooling | PAD DETAIL 411N1527-1 | 411N1527-1 | Boeing 737-300 SERIES, 737-400 SERIES,... | 2014-03-23 | current |
| Vaupell Northwest Molding and Tooling | PAD DETAIL 411N1527-2 | 411N1527-2 | Boeing 737-300 SERIES, 737-400 SERIES,... | 2014-03-23 | current |
| Aviation Materials Management INC | Pad Detail 411N1527-1 | 411N1527-1 | Boeing 737-300 Series, 737-400 Series,... | 2013-03-25 | current |
| Aviation Materials Management INC | Pad Detail 411N1527-2 | 411N1527-2 | Boeing 737-300 Series, 737-400 Series,... | 2013-03-25 | current |
| Spirit Aerosystems INC | PAD DETAIL 411N1527-2 | 411N1527-2 | Boeing 737-300 SERIES, 737-400 SERIES,... | 2009-03-30 | current |
| Spirit Aerosystems INC | PAD DETAIL 411N1527-1 | 411N1527-1 | Boeing 737-300 SERIES, 737-400 SERIES,... | 2009-03-30 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.