Nipple Waste
No failure report names the nipple waste. 2 FAA approvals let 1 company make a replacement nipple waste, Shaw Aero Devices INC (Sadi) holding the most (2).
Approved replacement parts 2 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a nipple waste and sell it as an approved part for the models named. These are the companies holding such approvals for a nipple waste:
For these models most: Boeing 717 (2).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Shaw Aero Devices INC (Sadi) | Nipple Assembly-Waste Drain Valve (Posi-Lift) 10101B577-2 | 10101B577-2 | Boeing 717-200 | 2002-09-05 | current |
| Shaw Aero Devices INC (Sadi) | Nipple Assembly-Waste Drain Valve (Posi-Lift) Shaw Aero Devices, Inc. 10101B577-2 | 10101B577-2 | Boeing 717-200 | 2002-08-13 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.