Input Seal
0 failure reports named the input seal in the last ten years, 2 since 1996. 2 FAA approvals let 2 companies make a replacement input seal, Able Engineering and Component Services, INC. holding the most (1).
Reports by year
Reports by year, as a table
| reports | |
|---|---|
| 1996 | 1 |
| 1997 | 1 |
Approved replacement parts 2 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a input seal and sell it as an approved part for the models named. These are the companies holding such approvals for a input seal:
For these models most: Bell 427 (2), Bell 407 (2).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Able Aerospace Services, INC. | Input Seal 4AA-342-412-101 | 427-342-412-101 | BELL 407, 427 | 2017-02-01 | current active |
| Able Engineering and Component Services, INC. | Input Seal 4AA-342-412-101 | 427-342-412-101 | Bell Helicopter... 407, 427 | 2017-02-01 | current active |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.