Hanger And
No failure report names the hanger and. 3 FAA approvals let 2 companies make a replacement hanger and, Jet Parts Engineering, INC. (Jpe) holding the most (2).
Approved replacement parts 3 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a hanger and and sell it as an approved part for the models named. These are the companies holding such approvals for a hanger and:
For these models most: Boeing 747 (3), Boeing 737 (3), Boeing 727 (3).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Jet Parts Engineering, LLC. (Jpe) | Hanger and Trunion Assembly 25049JP | 25049 | Boeing 727-100 Series, 727-200 Series,... | 2020-11-26 | current |
| Jet Parts Engineering, INC. (Jpe) | Hanger and Trunion Assembly 25049JP | 25049 | Boeing 727-100 Series, 727-200 Series,... | 2011-11-15 | current |
| Jet Parts Engineering, INC. (Jpe) | Hanger and Trunion Assembly 25049JP | 25049 | Boeing 727-100/-200 Series,... | 2006-06-18 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.