Gear Handle
0 failure reports named the gear handle in the last ten years, 53 since 1995. 2 FAA approvals let 1 company make a replacement gear handle, Duncan Aviation INC holding the most (2).
Reports by year
Reports by year, as a table
| reports | |
|---|---|
| 1995 | 11 |
| 1996 | 21 |
| 1997 | 11 |
| 1998 | 8 |
| 1999 | 2 |
Approved replacement parts 2 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a gear handle and sell it as an approved part for the models named. These are the companies holding such approvals for a gear handle:
For these models most: British Aerospace BAE 125 (2).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Duncan Aviation INC | Gear Handle Arm 061010003-1.0.19 | Modification Part | Beechcraft Corporation BAe.125 Series 800A & Hawker 800,... | 2015-03-30 | current |
| Duncan Aviation INC | Gear Handle Arm 061010003-1.0.21 | Modification Part | Beechcraft Corporation BAe.125 Series 800A & Hawker 800,... | 2015-03-30 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.