Flow Transducer
No failure report names the flow transducer. 1 FAA approvals let 1 company make a replacement flow transducer, Shadin Avionics (Name Change From Shadin Company 2/28/06) holding the most (1).
Approved replacement parts 1 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a flow transducer and sell it as an approved part for the models named. These are the companies holding such approvals for a flow transducer:
For these models most: Rockwell International 500 (1), North American SNJ-3 (1), Messerschmitt-Boelkow-Blohm BO-105 (1), Md Helicopters Inc 500 (1), Md Helicopters Inc 369 (1), Airbus Helicopters AS355 TwinStar (1).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Shadin Avionics (Name Change From Shadin Company 2/28/06) | Flow Transducer Bracket 543005 | Modification Part | Eurocopter Deutschland BO-105C, BO-105S, AS355F2 | 1992-04-19 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.