The U.S. aircraft register, updated daily
Parts

Flange Bushing

0 failure reports named the flange bushing in the last ten years, 5 since 1995. 6 FAA approvals let 3 companies make a replacement flange bushing, Rbc Heim Bearings holding the most (4).

Reports by year

0124551995
Reports by year, as a table
reports
19955

Approved replacement parts 6 parts manufacturer approvals

A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a flange bushing and sell it as an approved part for the models named. These are the companies holding such approvals for a flange bushing:

Rbc Heim Bearings 4Gemini Engineering 1Dupont Tribon Composites INC 1

For these models most: Boeing 767 (5), Boeing 777 (4), Boeing 747 (2).

MakerPartReplacesFitsGrantedStatus
Gemini EngineeringFLANGE BUSHING 414T2101-18414T2101-18Boeing 747-300 Series, 747-400 Series,...2009-06-03current
Rbc Heim BearingsFlange Bushing FB28AY09A020BBACB28AY09A020BBoeing 767-400ER SERIES, 777-200 SERIES, -300 SERIES2006-01-29current
Rbc Heim BearingsFlange Bushing FB28AY09A020BBACB28AY09A020BThe Boeing Company 767-400ER Series, 777-200 Series,...2006-01-29current
Rbc Heim BearingsFlange Bushing FB28AY07A018BBACB28AY07A018BThe Boeing Company 767-200 Series, 767-300 Series,...2006-01-29current
Rbc Heim BearingsFlange Bushing FB28AY07A018BBACB28AY07A018BBoeing 767-200 SERIES, -300 SERIES, -300F SERIES2006-01-29current
Dupont Tribon Composites INCFlange Bushing 3276Boeing 60B89007, Tribon LB-6800-ABoeing 7471992-10-21current

Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.