Exhaust Sleeve
0 failure reports named the exhaust sleeve in the last ten years, 10 since 1996. 3 FAA approvals let 1 company make a replacement exhaust sleeve, Aviation Products Systems INC holding the most (3).
Reports by year
Reports by year, as a table
| reports | |
|---|---|
| 1996 | 5 |
| 1997 | 2 |
| 1998 | 3 |
Approved replacement parts 3 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a exhaust sleeve and sell it as an approved part for the models named. These are the companies holding such approvals for a exhaust sleeve:
For these models most: Piper PA-18 Super Cub (3).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Aviation Products Systems INC | Exhaust Sleeve Adaptor APS180-579 | Modification Part | Piper PA-18-150 Series, PA-18A-150 Series,... | 2012-05-29 | current |
| Aviation Products Systems INC | Exhaust Sleeve APS180-578 | Modification Part | Piper PA-18-15- Series, PA-18A-150 Series,... | 2011-10-30 | current |
| Aviation Products Systems INC | Exhaust Sleeve APS180-579 | Modification Part | Piper PA-18-15- Series, PA-18A-150 Series,... | 2011-10-30 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.