Door Slide
0 failure reports named the door slide in the last ten years, 12 since 1996. 3 FAA approvals let 1 company make a replacement door slide, Tech Tool Plastics INC holding the most (3).
Reports by year
Reports by year, as a table
| reports | |
|---|---|
| 1996 | 4 |
| 1997 | 3 |
| 1998 | 2 |
| 1999 | 3 |
Approved replacement parts 3 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a door slide and sell it as an approved part for the models named. These are the companies holding such approvals for a door slide:
For these models most: Bell 206 JetRanger and LongRanger (3).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Tech Tool Plastics INC | Aft Door Slide Window 206B-1009-1, 206B-1009-2 | Bell Helicopter P/N 206-031-501-129, P/N... | BELL 206B | 1997-06-26 | current |
| Tech Tool Plastics INC | Aft Door Slide Window Assembly 206L-1009-1, 206L-1009-2 | Bell P/N 206-033-001-101, 206-033-001-102 | BELL 206L-4 | 1995-02-12 | current |
| Tech Tool Plastics INC | Aft Door Slide Window Assy 206L-1009-1, 206L-1009-2... | Bell Helicopter 206-033-601-9, 206-033-601-10 | Bell 206L, 206L1, 206L3 | 1989-08-21 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.