Cap Fitting
0 failure reports named the cap fitting in the last ten years, 1 since 1996. 4 FAA approvals let 1 company make a replacement cap fitting, Spirit Aerosystems INC holding the most (4).
Reports by year
Reports by year, as a table
| reports | |
|---|---|
| 1996 | 1 |
Approved replacement parts 4 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a cap fitting and sell it as an approved part for the models named. These are the companies holding such approvals for a cap fitting:
For these models most: Boeing 747 (4).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Spirit Aerosystems INC | Cap Fitting 65B10462-47 | 65B10462-47 | Boeing 747-400 Series, 747-400F Series | 2015-07-16 | current |
| Spirit Aerosystems INC | Cap Fitting Assy 65B10595-54 | 65B10595-54 | Boeing 747-100 Series, 747-200B Series,... | 2015-07-16 | current |
| Spirit Aerosystems INC | Cap Fitting 65B10462-47 | 65B10462-47 | Boeing 747-400 Series, 747-400F Series | 2005-12-12 | current |
| Spirit Aerosystems INC | Cap Fitting Assembly 65B10595-54 | 65B10595-54 | Boeing 747-100 Series, 747-200B Series,... | 2005-12-12 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.