Blow Out
0 failure reports named the blow out in the last ten years, 3 since 1995. 3 FAA approvals let 2 companies make a replacement blow out, Aeronautical Engineers INC holding the most (2). The reports call it "blow out door", "blow out panel".
Reports by year
Reports by year, as a table
| reports | |
|---|---|
| 1995 | 1 |
| 1997 | 1 |
| 1999 | 1 |
Approved replacement parts 3 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a blow out and sell it as an approved part for the models named. These are the companies holding such approvals for a blow out:
For these models most: Boeing 737 (2).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Aeronautical Engineers INC | Blow-out Pressure Vents Installation 3282-1. | Modification Part | Boeing 737-200, -300 Series, when the... | 2006-01-16 | current |
| Aeronautical Engineers INC | Blow-Out Pressure Vents Installation 3282-1. | Modification Part | Boeing 737-300 Series, when the following... | 2005-10-07 | current |
| Hartwell Corporation | Blow Out Latch H3240-1 | Fokker H3240-1 | Fokker F28MK0100 | 1995-05-15 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.