Axle Sleeve
0 failure reports named the axle sleeve in the last ten years, 1 since 1998. 3 FAA approvals let 2 companies make a replacement axle sleeve, Wencor LLC (Formerly Dixie Aerospace LLC) holding the most (2).
Reports by year
Reports by year, as a table
| reports | |
|---|---|
| 1998 | 1 |
Approved replacement parts 3 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a axle sleeve and sell it as an approved part for the models named. These are the companies holding such approvals for a axle sleeve:
For these models most: Boeing 757 (2), Boeing 737 (1).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Wencor LLC (Formerly Dixie Aerospace LLC) | Axle Sleeve 65C36462-2AAR | 65C36462-2 | Boeing 737-100 series, 737-200 series.... | 2011-09-20 | current |
| Wencor LLC (Formerly Dixie Aerospace LLC) | Axle Sleeve 161N1626-4AAR | Boeing 161N1626-4 | Boeing 757-200, -200CB, -200PF & -300 series | 2011-06-20 | current |
| Aar Pma Products | Axle Sleeve 161N1626-4AAR | 161N1626-4 | Boeing 757-200 Series, 757-200PF Series,... | 2009-01-26 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.