Angled Tie
No failure report names the angled tie. 2 FAA approvals let 1 company make a replacement angled tie, Aero/Mechanical Technologies Corporation holding the most (2).
Approved replacement parts 2 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a angled tie and sell it as an approved part for the models named. These are the companies holding such approvals for a angled tie:
For these models most: Piper PA-28 Cherokee, Warrior, Archer and Arrow (2), Piper PA-44 Seminole (1), Piper PA-42 (1), Piper PA-39 Twin Comanche C/R (1), Piper PA-38 Tomahawk (1), Piper PA-34 Seneca (1), Piper PA-32 Cherokee Six, Lance and Saratoga (1), Piper PA-31 Navajo and Chieftain (1), Piper PA-30 Twin Comanche (1), Piper PA-24 Comanche (1), Piper PA-23 Apache and Aztec (1).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Aero/Mechanical Technologies Corporation | Angled Tie Down Ring AMTI-P3800 | 35692-02 | Piper PA-28R-201T PA-28RT-201 PA-28RT-201T... | 2009-05-27 | current |
| Aero/Mechanical Technologies Corporation | Angled Tie Down Ring AMTI-P3800 | 18457-0000 | Piper PA-23-160, PA-23-235, PA-23-250 | 2009-05-27 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.