ST1360SE
ONE ONLY STC. SN 5213: Non-Group approval for Reduced Vertical Separation Minimum are contained in AeroMech Document No AMI-QD-JS-0023, Rev. A, dated February 1, 2008, or later FAA-approved revisions. Held by Aeromech Incorporated, which holds 171 approved modifications in all. Last revised March 3, 2008. System: other and general.
What it applies to
- Kind of product
- Aircraft
- Design holder
- Lockheed Martin Corporation
- Models
- 1329-25
- Type certificate
- 2A15
- On this site
- Lockheed 1329 6 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 5, 2026.