SR02139SE
Fabrication of Onboard Systems Model 200-355-00 and 200-369-00 Cargo Hook Fixed Provision Kits, Model 200-356-00 Cargo Hook Suspension Kit, and Model 200-357-00 Load Weigh Kit, in accordance with FAA Approved Onboard Systems Master Drawing List No. 155-160-00, Revision 2, dated September 27, 2011, or later FAA approved revision. Installation of the Onboard Systems Model 200-355-00, 200-356-00, 200-357-00, or 200-369-00 kits in accordance with FAA approved Onboard Systems Owners Manual 120-141-00, Revision 0, dated April 25, 2011, or later FAA approved revision. This modification must be inspected and maintained in accordance with section ATA 5 of FAA approved Onboard Systems Instructions for Continued Airworthiness Document 123-036-00, Revision 0, dated May 5, 2011, or later FAA approved revision, and Onboard Systems Cargo Hook. Held by Onboard Systems International, which holds 51 approved modifications in all. Last revised October 4, 2011. System: other and general.
What it applies to
- Kind of product
- Aircraft
- Design holder
- Agusta S.p.A.; Agusta S.p.A.; Agusta S.p.A.
- Models
- A109E, A119, AW119 MKII
- Type certificates
- H7EU, H7EU, H7EU
- On this site
- Agusta Aerospace Corp AW119 6 registered
Agusta Spa A109 108 registered
Agusta Spa A119 12 registered - The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 8, 2026.