SR01136SE

Fabrication of AMC AM369A6200-45, -46, -57, -58 Landing Gear Fillet Fairings and AM369H6200-73, and -74 Landing Gear Fairing Guides per AMC Master Drawing List No. MDL-AMC-003, Rev A, dated August 29, 2002 or later FAA approved revision; and installation of this assembly in accordance with the Maintenance Manual for the rotorcraft, document number CSP-HMI-2, Rev 21, or later FAA approved revision. Held by Aerometals, which holds 54 approved modifications in all. Last revised March 1, 2005. System: landing gear.

What it applies to

Kind of product: Aircraft
Design holder: MD Helicopter Inc.; MD Helicopter Inc.; MD Helicopter Inc.; MD Helicopter Inc.; MD Helicopter Inc.; MD Helicopter Inc.; MD Helicopter Inc.; MD Helicopter Inc.
Models: 369HS, 369A (Army OH-6A), 369D, 369HM, 369HE, 369FF, 500N, 369E
Type certificates: H3WE, H3WE, H3WE, H3WE, H3WE, H3WE, H3WE, H3WE
On this site: Hughes 369 500 series helicopters 122 registered
Md Helicopters Inc 369 108 registered
Md Helicopters Inc 500 15 registered
Md Helicopters Llc 369 34 registered
The FAA's record: On the FAA's site

What an approved modification is

A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.

Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 7, 2026.