SR00913SE
Installation of bubble window in pilot and co-pilot doors in accordance with Section D of Erickson Air-Crane (EAC) Report No. 1310, dated May 7, 2001, or later FAA approved revision; and removal of the tail pylon fairing and main landing gear fairings in accordance with EAC Maintenance Instructions No. RS-052 and RS-053, respectively, each dated May 10, 2001, or later FAA approved revision. Approved for serial number 64018 ONLY. Held by Erickson Air Crane INC. DBA Erickson Air-Crane, which holds 38 approved modifications in all. Last revised May 14, 2001. System: landing gear.
What it applies to
- Kind of product
- Aircraft
- Design holder
- Sikorsky Aircraft Corporation
- Models
- S-64E
- Type certificate
- H6EA
- On this site
- Sikorsky S-64 16 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 7, 2026.