SA51RM
Installation of tailcone ski rack in accordance with Branson Engineering Company, Inc. Drawing List No. 90005, Rev (A), dated July 1, 1995 or later FAA approved revision or Aviation Fabricators Drawing List AF-286, Rev (-), FAA approved February 6, 2004 or later FAA approved revision. Held by Aviation Fabricators INC, which holds 92 approved modifications in all. Last revised February 6, 2004. System: airframe structure.
What it applies to
- Kind of product
- Aircraft
- Design holder
- The Cessna Aircraft Company; The Cessna Aircraft Company
- Models
- 500, 550
- Type certificates
- A22CE, A22CE
- On this site
- Cessna 500 Citation I 63 registered
Cessna 550 Citation II 500 registered - The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 7, 2026.