SA3407NM
Installation of a de-icing system on the Hamilton Standard P/N 560501 propeller spinner afterbody. Held by Robert W. Murray, which holds 12 approved modifications in all. Last revised December 20, 2011. System: propeller.
What it applies to
- Kind of product
- Aircraft
- Design holder
- Lockheed Martin Corporation; Lockheed Martin Corporation; Lockheed Martin Corporation; Lockheed Martin Corporation; Lockheed Martin Corporation
- Models
- 382, 382B, 382E, 382F, 382G
- Type certificates
- A1SO, A1SO, A1SO, A1SO, A1SO
- On this site
- Lockheed Martin Corp 382 5 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 7, 2026.