SA01795CH
For Model AT-802A: Installation of Wipaire Model 10000 Amphibious Floats in accordance with Wipaire, Inc. Installation Drawing No. 7D1-4251, No Revision, dated January 13, 2003, or later FAA approved revisions. Operations with the floats removed are permitted when the aircraft is modified in accordance with Wipaire, Inc. Installation Drawing No. 7D1-4405, No Revision, dated January 13, 2003, or later FAA approved revisions. For Model AT-802: Installation of Wipaire Model 10000 Amphibious Floats in accordance with Wipaire, Inc. Installation Drawing No. 1003231, Revision A, dated June 12, 2008, or later FAA approved revisions. Operations with the floats removed are permitted when the aircraft is modified in accordance with Wipaire, Inc. Installation Drawing No. 1003406, Revision 01, dated July 15, 2008, or later FAA approved revisions. Held by Wipaire INC., which holds 7 approved modifications in all. Last revised July 15, 2026. System: airframe structure.
What it applies to
- Kind of product
- Aircraft
- Design holder
- Air Tractor Inc.; Air Tractor Inc.
- Models
- AT-802, AT-802A
- Type certificates
- A19SW, A19SW
- On this site
- Air Tractor Inc AT-802 686 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 21, 2026.