47-33-03: Tail Cone Drain Holes
FAA order 47-33-03 is an airworthiness directive. The FAA's subject line: Tail Cone Drain Holes. System: airframe structure.
What it applies to as the FAA lists it
- Kind of product
- Aircraft
- Makes
- Textron Aviation Inc.
- Models
- Army AT-11, C18S
Dates and paperwork
- Docket
- Unknown
- Status
- Current
- The FAA's document
- Read the order on the FAA's site
The order itself the regulatory text, as published
Show the full text (503 characters)
47-33-03 BEECH: (Was Mandatory Note 5 of AD-757-2 and Mandatory Note 4 of AD- 582-2.) Applies to AT-11 and C18S Aircraft. \n\n\tTo be accomplished prior to certification or, if certificated, on next periodic inspection but not later than November 1, 1947. \n\n\tIn order to provide better tail cone drainage, add two drain holes in the tail cone and two 1/4-inch drain holes in the fuselage bulkhead No. 15 as shown in Figure 2. \n\n\n\n\n\t(Beech Service Bulletin No. C18-7 covers this same subject.)
Source: FAA Dynamic Regulatory System, airworthiness directives. The FAA's document is the authority; the register counts are this site's, from the FAA register of November 6, 2026. Connections as data: /graph/directive/47-33-03.json · aircraft systems.