47-10-32: Upper Wing Surface Inspection
FAA order 47-10-32 is an airworthiness directive. The FAA's subject line: Upper Wing Surface Inspection. System: airframe structure.
What it applies to as the FAA lists it
- Kind of product
- Aircraft
- Makes
- Lockheed Aircraft Corporation
- Models
- 49-46
Dates and paperwork
- Docket
- Unknown
- Status
- Current
- The FAA's document
- Read the order on the FAA's site
The order itself the regulatory text, as published
Show the full text (580 characters)
47-10-32 LOCKHEED: (Was Service Note 2 of AD-763-3.) Applies Only to Model 49 Serial Numbers 2021 to 2067, Inclusive.
At each periodic inspection, examine the upper wing surface forward of the aileron beam and just outboard of Station 458 joint for the presence of buckles. If serious buckles are found the skin in that area should be replaced and gussets added. After the entire affected area (approximately 5 inches x 36 inches) has been reworked in this manner, no further periodic inspections will be required.
(LAC Service Instruction 49/SI-26 covers this same subject.)
Source: FAA Dynamic Regulatory System, airworthiness directives. The FAA's document is the authority; the register counts are this site's, from the FAA register of November 6, 2026. Connections as data: /graph/directive/47-10-32.json · aircraft systems.