44-52-01: Outer Wing Panel
FAA order 44-52-01 is an airworthiness directive. The FAA's subject line: Outer Wing Panel. System: airframe structure.
What it applies to as the FAA lists it
- Kind of product
- Aircraft
- Makes
- The Boeing Company
- Models
- 247-D (Army C-73)
Dates and paperwork
- Docket
- Unknown
- Status
- Current
- The FAA's document
- Read the order on the FAA's site
The order itself the regulatory text, as published
Show the full text (788 characters)
44-52-01\tBOEING: (Was Service Note 1 of AD-558-1 and Service Note 1 of AD-524-1.) Applies to 247-D Aircraft. \n\tInspect immediately and every 250 hours thereafter the outer wing panel 17SRT aluminum alloy spar chord members for cracks. Unless special openings are installed, the outer panels may have to be removed to permit thorough inspection. If cracks are found, the members should be repaired or replaced in a manner satisfactory to the FAA. If replacement 24ST tubing is installed no further inspection will be necessary. Boeing Service Bulletin No. 1 of D-6134 describes a satisfactory method of installation of inspection openings in the lower surface of the outer wing. Boeing Service Bulletin No. 2 of D-6134 covers replacement of 17SRT spar chords with 24ST spar chords.
Source: FAA Dynamic Regulatory System, airworthiness directives. The FAA's document is the authority; the register counts are this site's, from the FAA register of November 6, 2026. Connections as data: /graph/directive/44-52-01.json · aircraft systems.