eFlight
FAA orders · airworthiness directive · current

2022-07-04: Aircraft Fuel System

FAA order 2022-07-04 is an airworthiness directive in force since May 9, 2022. The FAA's subject line: Aircraft Fuel System. It names Pilatus PC-12: about 1,448 aircraft on the U.S. register today, though an order usually covers particular versions or serial numbers rather than every one. System: fuel system.

What it applies to as the FAA lists it

Kind of product
Aircraft
Makes
Pilatus Aircraft Ltd.
Models
PC-12/47E
On this site
Pilatus PC-12 1,448 registered

Dates and paperwork

In force since
May 9, 2022
Published
April 4, 2022 (signed March 16, 2022)
Docket
FAA-2021-0999
Status
Current
The FAA's document
Read the order on the FAA's site

The FAA's summary their words, unchanged

The FAA is adopting a new airworthiness directive (AD) for certain Pilatus Aircraft Ltd. (Pilatus) Model PC-12/47E airplanes. This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as inward vent valves installed during production without chromate conversion coating on the bonding surface. This AD requires modifying the inward vent valves and prohibits installing unmodified inward vent valves. The FAA is issuing this AD to address the unsafe condition on these products.

The order itself the regulatory text, as published

Show the full text (5,411 characters)
1. The authority citation for part 39 continues to read as follows: Authority: 49 U.S.C. 106(g), 40113, 44701. 2. The FAA amends § 39.13 by adding the following new airworthiness directive: 2022-07-04 Pilatus Aircraft Ltd.: Amendment 39-21991; Docket No. FAA-2021-0999; Project Identifier MCAI-2021-00036-A. (a) Effective Date This airworthiness directive (AD) is effective May 9, 2022. (b) Affected ADs None. (c) Applicability This AD applies to Pilatus Aircraft Ltd. Model PC-12/47E airplanes, serial number (S/N) 1720 and S/N 2001 and larger, certificated in any category. (d) Subject Joint Aircraft System Component (JASC) Code 2800, Aircraft Fuel System. (e) Unsafe Condition This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as inward vent valves installed during production without chromate conversion coating on the bonding surface. The FAA is issuing this AD to prevent corrosion and degradation of the electrical bonding to Rib 16. This condition, if not addressed, could lead to arcing between the ungrounded equipment and the primary structure in the event of a lightning strike, resulting in a fire and reduced airplane control. (f) Compliance Comply with this AD within the compliance times specified, unless already done. (g) Definitions (1) Group 1 airplanes: Airplanes with an inward vent valve part number (P/N) 963.04.26.520 installed with a serial number listed in section 1.C(1) of Pilatus Service Bulletin No. 28-015, dated October 12, 2020 (Pilatus SB 28-015). (2) Group 2 airplanes: Airplanes without an inward vent valve P/N 963.04.26.520 installed with a serial number listed in section 1.C(1) of Pilatus SB 28-015. (h) Modification of Inward Vent Valves For Group 1 airplanes, within 1,200 hours time-in-service after the effective date of this AD or within 9 months after the effective date of this AD, whichever occurs first, modify each inward vent valve in accordance with the Accomplishment Instructions and Rework Instructions in Pall Corporation Service Bulletin SB9337-01-29-01, Issue 1, dated September 22, 2020 (Pall SB9337-01-29-01, Issue 1). (i) Prohibited Installation For all airplanes, as of the effective date of this AD, do not install an inward vent valve P/N 963.04.26.520 that has a serial number listed in section 1.C(1) of Pilatus SB 28-015 on any airplane, unless it is modified in accordance with the Accomplishment Instructions and Rework Instructions of Pall SB9337-01-29-01, Issue 1. (j) Alternative Methods of Compliance (AMOCs) (1) The Manager, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the manager of the certification office, send it to the attention of the person identified in paragraph (k)(1) of this AD and email to: [email protected]. (2) Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office. (k) Related Information (1) For more information about this AD, contact Doug Rudolph, Aviation Safety Engineer, General Aviation & Rotorcraft Section, FAA, General Aviation & Rotorcraft Section, International Validation Branch, 901 Locust, Room 301, Kansas City, MO 64106; phone: (816) 329-4059; email: [email protected]. (2) Refer to MCAI European Union Aviation Safety Agency (EASA) AD 2021-0010, dated January 11, 2021, for related information. You may examine the EASA AD at https://www.regulations.gov by searching for and locating Docket No. Docket No. FAA-2021-0999. (l) Material Incorporated by Reference (1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51. (2) You must use this service information as applicable to do the actions required by this AD, unless the AD specifies otherwise. (i) Pall Corporation Service Bulletin SB9337-01-29-01, Issue 1, dated September 22, 2020. (ii) Pilatus Service Bulletin No. 28-015, dated October 12, 2020. (3) For service information identified in this AD, contact Pilatus Aircraft Ltd., CH-6371, Stans, Switzerland; phone: +41 848 247 365; email: [email protected]; website: https://www.pilatus-aircraft.com/. (4) You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 901 Locust, Kansas City, MO 64106. For information on the availability of this material at the FAA, call (817) 222-5110. (5) You may view this service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email: [email protected], or go to: https://www.archives.gov/federal-register/cfr/ibr-locations.html. Issued on March 16, 2022. Lance T. Gant, Director, Compliance & Airworthiness Division, Aircraft Certification Service. [FR Doc. 2022-06975 Filed 4-1-22; 8:45 am]BILLING CODE 4910-13-P

Related safety bulletins advice on the same designs, not orders

2017-05-19CE-17-13 · Engine Oil Pressure; Torque Transducer Oil Pressure Pipe P-Clamp Installation
2016-01-25CE-16-12 · AUTO FLIGHT - Autopilot
2004-10-25CE-05-08 ·
2004-07-08CE-04-70 ·
2004-04-12CE-04-62 ·

Source: FAA Dynamic Regulatory System, airworthiness directives. The FAA's document is the authority; the register counts are this site's, from the FAA register of November 20, 2026. Connections as data: /graph/directive/2022-07-04.json · aircraft systems.

Aircraft

By kindModelsMakersEnginesFleetsWhat changed

Fly

Plan a flightAirportsLive mapRoutes and flightsFuels

Training and work

TrainingFlight schoolsGround schoolsPilot examinersMedical examinersJobs

Companies

DirectoryCharter operatorsFBOsRepair stationsClaim your listing

Safety and data

AccidentsRecords checkAnalyticsSAFxCHANGEThe graphAbout

Colours follow your device's light or dark setting.