Tip Angle
No failure report names the tip angle. 4 FAA approvals let 1 company make a replacement tip angle, Cub Crafters INC holding the most (4).
Approved replacement parts 4 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a tip angle and sell it as an approved part for the models named. These are the companies holding such approvals for a tip angle:
For these models most: Piper PA-25 Pawnee (4), Piper PA-19 (4), Piper PA-18 Super Cub (4), Piper PA-17 Vagabond (4), Piper PA-16 Clipper (4), Piper PA-15 (4), Piper PA-11 Cub Special (4).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Cub Crafters INC | Tip Angle 102416-04 | Modification Part | Piper Aircraft, Inc. PA-11, PA -15, PA -16 | 2013-09-23 | current |
| Cub Crafters INC | Tip Angle 102416-01 | Modification Part | Piper Aircraft, Inc. PA-11, PA -15, PA -16 | 2013-09-23 | current |
| Cub Crafters INC | Tip Angle 102416-02 | Modification Part | Piper Aircraft, Inc. PA-11, PA -15, PA -16 | 2013-09-23 | current |
| Cub Crafters INC | Tip Angle 102416-03 | Modification Part | Piper Aircraft, Inc. PA-11, PA -15, PA -16 | 2013-09-23 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.