The U.S. aircraft register, updated daily
Parts

Strut Bracket

No failure report names the strut bracket. 6 FAA approvals let 2 companies make a replacement strut bracket, Tube Processing CORP holding the most (3).

Approved replacement parts 6 parts manufacturer approvals

A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a strut bracket and sell it as an approved part for the models named. These are the companies holding such approvals for a strut bracket:

Tube Processing CORP 3International Aerospace Tubes LLC 3
MakerPartReplacesFitsGrantedStatus
International Aerospace Tubes LLCStrut 1 Bracket 504034A01Modification PartGeneral Electric CF6-45/50 Series2001-09-25current
International Aerospace Tubes LLCStrut 6 AFT Bracket 504030A01Modification PartGeneral Electric CF6-45/50 Series2001-09-25current
International Aerospace Tubes LLCStrut 8 AFT Bracket 504031A01Modification PartGeneral Electric CF6-45/50 Series2001-09-25current
Tube Processing CORPStrut 6 AFT Bracket 504030A01Modification PartGeneral Electric CF6-45/50 Series2000-02-01current
Tube Processing CORPStrut 1 Bracket 504034A01Modification PartGeneral Electric CF6-45/50 Series2000-02-01current
Tube Processing CORPStrut 8 AFT Bracket 504031A01Modification PartGeneral Electric CF6-45/50 Series2000-02-01current

Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.