Single Stud
No failure report names the single stud. 5 FAA approvals let 2 companies make a replacement single stud, Amsafe Bridport holding the most (3).
Approved replacement parts 5 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a single stud and sell it as an approved part for the models named. These are the companies holding such approvals for a single stud:
For these models most: Boeing 767 (3), Piper PA-34 Seneca (2), Piper PA-32 Cherokee Six, Lance and Saratoga (2), Boeing 777 (2), Boeing 757 (2), Boeing 747 (2), Boeing 737 (2), Boeing 727 (1), Boeing 707 (1).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Amsafe Bridport | Single Stud Fitting CCI-1000-1A | WB10730 10730 | BOEING 707-300 Series, 707-400 Series,... | 2010-11-15 | current |
| Amsafe Bridport | Single Stud Fitting CCI-1000-1A | 11251 | BOEING 747-100 Series, 747-200B Series,... | 2010-11-15 | current |
| Amsafe Bridport | Single Stud Fitting CCI-1000-1A | 40340-20 | BOEING 737-100 Series, 737-200 Series,... | 2010-11-15 | current |
| Cargo Systems INC | Single Stud Fitting 40340-20 | Modification Part | Piper PA-32 Series, PA-34 Series | 2008-10-16 | current |
| Cargo Systems INC | Single Stud Fitting 32401 | Modification Part | Piper PA-32 Series, PA-34 Series | 2008-10-16 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.