Inertial Separation
No failure report names the inertial separation. 6 FAA approvals let 2 companies make a replacement inertial separation, Blackhawk Modifications INC holding the most (3).
Approved replacement parts 6 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a inertial separation and sell it as an approved part for the models named. These are the companies holding such approvals for a inertial separation:
For these models most: Cessna 208 Caravan (3).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Blackhawk Modifications INC | Aft Inertial Separation Lever Assembly 200803-504-011 | Modification Part | Cessna/Textron Aviation Inc. 208B s/n’s 208B0001 to 208B1189;... | 2020-10-13 | current |
| Blackhawk Modifications INC | Aft Inertial Separation Lever Assembly 200803-504-011 | Modification Part | Cessna/Textron Aviation Inc. 208 s/n’s, 2080001 to 2080499 | 2020-10-13 | current |
| Blackhawk Modifications INC | Fwd. Inertial Separation Lever 200803-504-073 | Modification Parts | Cessna 208B | 2012-04-15 | current |
| Aerospace Welding Minneapolis, INC. | Fwd Inertial Separation Lever 200803-504-073 | Modification Part | Cessna Caravan 208B | 2012-03-19 | current |
| Aerospace Welding Minneapolis, INC. | Fwd Inertial Separation Lever 200803-504-007 | Modification Part | Cessna Caravan 208B | 2011-06-29 | current |
| Aerospace Welding Minneapolis, INC. | Aft Inertial Separation Lever 200803-504-006 | Modification Part | Cessna Caravan 208B | 2011-06-29 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.