Hinge Tai
No failure report names the hinge tai. 4 FAA approvals let 2 companies make a replacement hinge tai, Alliance Aerospace Engineering LLC holding the most (2).
Approved replacement parts 4 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a hinge tai and sell it as an approved part for the models named. These are the companies holding such approvals for a hinge tai:
For these models most: Boeing 767 (4).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Alliance Aerospace Engineering INC | Hinge-TAI Duct Door Leading Edge Outbd Wing 10-T0220-41 | 114T0220-41 | Boeing 767-200, 767-300, 767-300F | 2018-03-29 | current |
| Alliance Aerospace Engineering INC | Hinge-TAI Duct Door Leading Edge Outbd Wing 10-T0220-42 | 114T0220-42 | Boeing 767-200, 767-300, 767-300F | 2018-03-29 | current |
| Alliance Aerospace Engineering LLC | Hinge-TAI Duct Door Leading Edge Outbd Wing 10-T0220-42 | 114T0220-42 | Boeing Company 767-200, 767-300, 767-300F | 2011-04-18 | current |
| Alliance Aerospace Engineering LLC | Hinge-TAI Duct Door Leading Edge Outbd Wing 10-T0220-41 | 114T0220-41 | Boeing Company 767-200, 767-300, 767-300F | 2011-04-18 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.