Heater Vent
No failure report names the heater vent. 2 FAA approvals let 1 company make a replacement heater vent, Plane Plastics LTD holding the most (2).
Approved replacement parts 2 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a heater vent and sell it as an approved part for the models named. These are the companies holding such approvals for a heater vent:
For these models most: Hughes 269 300 series helicopters (2).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Plane Plastics LTD | Heater Vent R/H K4867-2 | Hughes Part No. 269A4867-2 | Hughes 269A-1, B, & C | 2008-05-22 | current |
| Plane Plastics LTD | Heater Vent L/H K4867-1 | Hughes Part No. 269A4867-1 | Hughes 269A1, B, C | 2008-05-22 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.