Parts

Flex Connector

0 failure reports named the flex connector in the last ten years, 1 since 1998. 4 FAA approvals let 3 companies make a replacement flex connector, Rsa Engineered Products LLC holding the most (2).

Reports by year

Reports by year, as a table

	reports
1998	1

Approved replacement parts 4 parts manufacturer approvals

A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a flex connector and sell it as an approved part for the models named. These are the companies holding such approvals for a flex connector:

Rsa Engineered Products LLC 2Meggitt Thermal Systems INC 1Avica INC 1

For these models most: Bombardier DHC-8 Dash 8 and Q400 (4).

Maker	Part	Replaces	Fits	Granted	Status
Rsa Engineered Products LLC	Flex Connector, Bellows 69A02	N599-8238	Bombardier, Inc DHC-8-100 Series, DHC-8-200 Series,...	2013-04-24	current
Rsa Engineered Products LLC	Flex Connector, Bellows 69A02	N599-8238	Bombardier, Inc DHC-8-100 Series DHC-8-200 Series...	2012-09-05	current
Meggitt Thermal Systems INC	Flex Connector, Bellows 69A02	N599-8238	Bombardier, Inc. DHC-8-100 Series, DHC-8-200 Series,...	2006-10-29	current
Avica INC	Flex Connector, Bellows 69A02	N599-8238	Bombardier, Inc. DHC-8-100 Series, DHC-8-200 Series,...	2003-10-30	current

Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.