Ceconite Fabric
No failure report names the ceconite fabric. 4 FAA approvals let 2 companies make a replacement ceconite fabric, Ceconite INC holding the most (3).
Approved replacement parts 4 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a ceconite fabric and sell it as an approved part for the models named. These are the companies holding such approvals for a ceconite fabric:
For these models most: Piper PA-25 Pawnee (1).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Ceconite INC | Ceconite Fabric Covering 103 | Modification Part | Miscellaneous Aircraft Model(s) as listed on... | 1997-01-06 | current |
| Ceconite INC | Ceconite Fabric Covering 101 | Modification Part | Miscellaneous Aircraft Model(s) as listed on... | 1997-01-06 | current |
| Ceconite INC | Ceconite Fabric Covering 102 | Modification Part | Miscellaneous Aircraft Model(s) as listed on... | 1997-01-06 | current |
| Aar Distribution | Ceconite Fabric and Urethane Finish Material 101 | Existing covering | Piper PA-25 (normal), PA-25 (Restricted) | 1986-04-14 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.