Bolt Pivot
No failure report names the bolt pivot. 4 FAA approvals let 3 companies make a replacement bolt pivot, Certified Aerospace Corporation, INC. holding the most (2).
Approved replacement parts 4 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a bolt pivot and sell it as an approved part for the models named. These are the companies holding such approvals for a bolt pivot:
For these models most: Mcdonnell Douglas MD-11 (2), Mcdonnell Douglas DC-10 (2), Douglas DC-10 (2), Boeing 737 (2).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Turbine Kinetics INC, A Heico Aerospace Company | Bolt-Pivot 113A9308-1KT | Boeing P/N, 113A9308-1 | The Boeing Company 737-900ER Series, 737-8, 737-9 | 2018-07-29 | current |
| Certified Aerospace Corporation, INC. | Bolt-Pivot Pin, Main Landing Gear CAC 32M-7373-1 | ARG 7373-1 | Boeing DC-10-30, DC-10-30 F, DC-10-40 | 2012-04-19 | current |
| Certified Aerospace Corporation, INC. | Bolt-Pivot Pin, Main Landing Gear AL1011-7373-1 | ARG 7373-1 | McDonnell Douglas DC-10-30, DC-10-30 F, DC-10-40 | 2011-12-04 | current |
| Turbine Kinetics INC, Subsidiary of Heico CORP | Bolt-Pivot 113A9308-1KT | 113A9308-1 | Boeing 737-600 Series, 737-700 Series,... | 2011-10-23 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.