Aileron Flap
No failure report names the aileron flap. 5 FAA approvals let 4 companies make a replacement aileron flap, Knots 2U LTD holding the most (2).
Approved replacement parts 5 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a aileron flap and sell it as an approved part for the models named. These are the companies holding such approvals for a aileron flap:
For these models most: Piper PA-30 Twin Comanche (1), Piper PA-24 Comanche (1), Cessna 180 Skywagon (1), Cessna 175 Skylark (1), Cessna 172 Skyhawk (1), Cessna 170 (1), Cessna 150 (1), Beechcraft G58 (1), Beechcraft E-55 (1), Beechcraft D35 (1), Beechcraft 95 Travel Air and Baron 55 (1), Beechcraft 58 Baron (1).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| D'Shannon Products, LTD | Aileron & Flap Gap Seal Kit DLB-6300 | Modification Part | Beechcraft Corporation 95-B55A (S/N TC-1410 through... | 2016-01-14 | current |
| Aviation Research Sys INC | Aileron & Flap Gap Seals Dwg 1002 | Modification Part | Beech Raytheon) (C35, D35 | 1996-02-28 | current |
| Gator Aerial Enterprises | Aileron & Flap Gap Seal Kit Unknown | Modification Part | Cessna 150, 170B, 172 | 1993-09-27 | current |
| Knots 2U LTD | Aileron Flap, Flap/Fuselage, and Rudder Gap Seals, Wing... Dwg DLPA-30 | Modification Part | Piper PA-30, -39 | 1991-12-04 | current |
| Knots 2U LTD | Aileron Flap, Flap/Fuselage, and Rudder Gap Seals, Wing... Dwg DLPA-24 | Modification Part | Piper PA-24 | 1991-12-04 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.