Adapter Sleeve
0 failure reports named the adapter sleeve in the last ten years, 1 since 1996. 3 FAA approvals let 1 company make a replacement adapter sleeve, Aerometals holding the most (3).
Reports by year
Reports by year, as a table
| reports | |
|---|---|
| 1996 | 1 |
Approved replacement parts 3 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a adapter sleeve and sell it as an approved part for the models named. These are the companies holding such approvals for a adapter sleeve:
For these models most: Md Helicopters Inc 500 (3), Md Helicopters Inc 369 (2), Md Helicopters Llc 369 (1), Hughes Helicopters Inc HUGHES 369 (1).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Aerometals | Adapter Sleeve - Landing Skid 369X26012-5 | 369D26012-5 | MDHI Hughes) (369D, 369E, 369FF | 2015-01-21 | current |
| Aerometals | Adapter Sleeve - Landing Skid 369X26012-5 | MDHC (Hughes) 369D26012-5 | MD Helicopters, Inc. MDHI) (369D, 369E, 369FF | 1998-11-16 | current |
| Aerometals | Adapter Sleeve- Landing Skid 369X26012-5 | MDHC (Hughes) 369D26012-5 | MD Helicopters, Inc. MDHI) (369D, 369E, 369FF | 1998-02-22 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.