ST02813AT
Removal of Cessna Cabin/Lavatory Fluorescent Lighting System and/or Cessna Reading Lights and the Installation of B/E Aerospace LED Indirect Lights and/or Reading Lights Assemblies in accordance with B/E Aerospace Master Drawing List BE-MDL-001 Rev. A, dated 9 February 2004 or later FAA approved revision. Held by B/E Aerospace, which holds 123 approved modifications in all. Last revised April 26, 2004. System: cabin, seats and restraints.
What it applies to
- Kind of product
- Aircraft
- Design holder
- The Cessna Aircraft Company
- Models
- 750
- Type certificate
- T00007WI
- On this site
- Cessna 750 Citation X 287 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 7, 2026.