ST01469SE
Installation of new seats and interior reconfiguration in 757-200 aircraft in accordance with Flight Structures, Inc., Master Drawing List A3FS357-D01, Revision F, dated October 18, 2004, or later Federal Aviation Administration (FAA) approved revision. Held by Flight Structures INC., which holds 53 approved modifications in all. Last revised October 22, 2004. System: cabin, seats and restraints.
What it applies to
- Kind of product
- Aircraft
- Design holder
- The Boeing Company
- Models
- 757-200 Series
- Type certificate
- A2NM
- On this site
- Boeing 757 440 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 20, 2026.