SR09492RC
Installation of Pratt & Whitney Canada PT6C-67D, engine in accordance with DynCorp International Master Drawing List Report Number D1H-MDL-100, Revision IR, dated \nApril 17, 2007, or later FAA approved revision. DynCorp International Rotorcraft Flight Manual Supplement (RFMS) Report Number DIER-0012, Revision 0, dated \nJanuary 17, 2008, or later FAA approved revision, is required. Instructions for Continued Airworthiness (ICAs) DIER-0003, Revision 1, dated August 30, 2007, or later revision is required. Airworthiness Limitations section of ICA DIER-0003, approved on August 30, 2007 or later approved revision is required. Held by Talon Aerospace INC., which holds 2 approved modifications in all. Last revised August 22, 2022. System: engine.
What it applies to
- Kind of product
- Aircraft
- Design holder
- Global Helicopter Technology Inc.
- Models
- UH-1H
- Type certificate
- R00002RC
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 20, 2026.