SE01243WI
Installation of Barron Aviation intake tube drain kits on the engines listed on the attached FAA Approved Model List (AML) No. SE01243WI, dated April 26, 2004, or later FAA Approved revision. Held by Barron Aviation, which holds 5 approved modifications in all. Last revised July 13, 2004. System: engine.
What it applies to
- Kind of product
- Engine
- Design holder
- Teledyne Continental Motors; Teledyne Continental Motors; Teledyne Continental Motors; Teledyne Continental Motors; Teledyne Continental Motors; Teledyne Continental Motors; Air Repair Inc.; Air Repair Inc.; Air Repair Inc.; Air Repair Inc.; Air Repair Inc.; Air Repair Inc.; Air Repair Inc.; Air Repair Inc.; Air Repair Inc.; Air Repair Inc.; Air Repair Inc.
- Models
- W670-16, W670-23, W670-6A, W670-6N, W670-K, W670-M, R-755A1, R-755A2, R-755A2M, R-755A2M1, R-755B1, R-755B2, R-755B2M, R-755E, L-4, L-4 Series, L-6 Series
- Type certificates
- E-162, E-162, E-162, E-162, E-162, E-162, E-237, E-237, E-237, E-237, E-237, E-237, E-237, E-237, TC 121, TC 121, TC 195
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 19, 2026.