SA2715CE

Installation of single place composite commuter seats on the seat rails per Aviation Fabricators Drawing list No. AF-130 stamped "FAA Approved" May 2, 1991, or later FAA approved revision. Held by Aviation Fabricators INC, which holds 92 approved modifications in all. Last revised October 22, 2003. System: cabin, seats and restraints.

What it applies to

Kind of product: Aircraft
Design holder: The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company
Models: 401, 401A, 401B, 402, 402A, 402B, 402C, 411, 411A, 414, 414A, 421, 421A, 421B, 421C
Type certificates: A7CE, A7CE, A7CE, A7CE, A7CE, A7CE, A7CE, A7CE, A7CE, A7CE, A7CE, A7CE, A7CE, A7CE, A7CE
On this site: Cessna 401 51 registered
Cessna 402 174 registered
Cessna 411 10 registered
Cessna 414 Chancellor 605 registered
Cessna 421 Golden Eagle 769 registered
The FAA's record: On the FAA's site

What an approved modification is

A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.

Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 7, 2026.