eFlight
Approved modifications · supplemental type certificate · current · amended

SA02161AK

Fabrication and installation of Stabilizer Jack-Screw Actuator in accordance with North Pacific Welding Drawing Number C-0712500, dated March 31, 2000 and Cessna 100 Series 1962 and prior Service Manual, dated February 1, 1962; or McFarlane Aviation, Inc., Drawing 1111-1, revision original, dated June 1, 2010 or later FAA approved revisions. Held by Mcfarlane Aviation, INC., which holds 8 approved modifications in all. Last revised May 13, 2011. System: other and general.

What it applies to

Kind of product
Aircraft
Design holder
Cessna Aircraft Company; Cessna Aircraft Company; Cessna Aircraft Company; Cessna Aircraft Company; Cessna Aircraft Company
Models
182, 182A, 182B, 182C, 182D
Type certificates
3A13, 3A13, 3A13, 3A13, 3A13
On this site
Cessna 182 Skylane 11,830 registered
The FAA's record
On the FAA's site

What an approved modification is

A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.

Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of November 20, 2026.

Aircraft

By kindModelsMakersEnginesFleetsWhat changed

Fly

Plan a flightAirportsLive mapRoutes and flightsFuels

Training and work

TrainingFlight schoolsGround schoolsPilot examinersMedical examinersJobs

Companies

DirectoryCharter operatorsFBOsRepair stationsClaim your listing

Safety and data

AccidentsRecords checkAnalyticsSAFxCHANGEThe graphAbout

Colours follow your device's light or dark setting.