SA02113AK
Fabrication and installation of Stabilizer Jack-Screw Actuator in accordance with North Pacific Welding Drawing Number C-0712500, dated March 31, 2000 and Cessna Skywagon 180 and 185 Series Service Manual; or McFarlane Aviation, Inc., Drawing 1111-1, revision original, dated June 1, 2010 or later FAA approved revisions. Held by Mcfarlane Aviation, INC., which holds 8 approved modifications in all. Last revised May 13, 2011. System: other and general.
What it applies to
- Kind of product
- Aircraft
- Design holder
- Cessna Aircraft Company; Cessna Aircraft Company; Cessna Aircraft Company; Cessna Aircraft Company; Cessna Aircraft Company; Cessna Aircraft Company; Cessna Aircraft Company; Cessna Aircraft Company
- Models
- 185, 185A, 185B, 185C, 185D, 185E, A185E, A185F
- Type certificates
- 3A24, 3A24, 3A24, 3A24, 3A24, 3A24, 3A24, 3A24
- On this site
- Cessna 185 Skywagon 227 registered
Cessna A185 Skywagon 1,372 registered - The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 21, 2026.