eFlight
FAA orders · airworthiness directive · current

2023-14-01: Navigation

FAA order 2023-14-01 is an airworthiness directive in force since July 27, 2023. The FAA's subject line: Navigation. It names Bombardier BD-700 Global Express, 5000 and 6000: about 662 aircraft on the U.S. register today, though an order usually covers particular versions or serial numbers rather than every one. System: instruments and avionics.

What it applies to as the FAA lists it

Kind of product
Aircraft
Makes
Bombardier Inc.
Models
BD-700-2A12
On this site
Bombardier BD-700 Global Express, 5000 and 6000 662 registered

Dates and paperwork

In force since
July 27, 2023
Published
July 12, 2023 (signed July 3, 2023)
Docket
FAA-2023-1407
Replaces
2023-06-13
Status
Current
The FAA's document
Read the order on the FAA's site

The FAA's summary their words, unchanged

The FAA is superseding Airworthiness Directive (AD) 2023-06- 13, which applied to all Bombardier, Inc., Model BD-700-2A12 airplanes. AD 2023-06-13 required revising the existing airplane flight manual (AFM) with new limitations to mitigate identified hazards due to interference from wireless broadband operations in the 3.7-3.98 GHz frequency band (5G C-Band) as identified by Notices to Air Missions (NOTAMs). Since the FAA issued AD 2023-06-13, the FAA determined that additional limitations are needed due to the continued deployment of new 5G C-Band stations whose signals are expected to cover most of the contiguous United States at transmission frequencies between 3.7-3.98 GHz. This AD requires revising the limitations section of the existing AFM to incorporate limitations prohibiting dispatch under certain master minimum equipment list (MMEL) items. The FAA is issuing this AD to address the unsafe condition on these products.

The order itself the regulatory text, as published

Show the full text (5,366 characters)
1. The authority citation for part 39 continues to read as follows: Authority: 49 U.S.C. 106(g), 40113, 44701. 2. The FAA amends § 39.13 by: a. Removing Airworthiness Directive 2023-06-13, Amendment 39 22399 (88 FR 19811, April 4, 2023); and b. Adding the following new airworthiness directive: 2023-14-01 Bombardier, Inc.: Amendment 39-22501; Docket No. FAA-2023-1407; Project Identifier MCAI-2023-00788-T. (a) Effective Date This airworthiness directive (AD) is effective July 27, 2023. (b) Affected ADs This AD replaces AD 2023-06-13, Amendment 39-22399 (88 FR 19811, April 4, 2023) (AD 2023-06-13). (c) Applicability This AD applies to all Bombardier, Inc., Model BD-700-2A12 airplanes, certificated in any category. (d) Subject Air Transport Association (ATA) of America Code 34, Navigation. (e) Reason This AD was prompted by a determination that radio altimeters cannot be relied upon to perform their intended function if they experience interference from wireless broadband operations in the 3.7-3.98 GHz frequency band (5G C-Band), and a recent determination that this interference may affect the ground spoiler deployment system, ground mode control laws, and air mode control laws. The FAA is issuing this AD to address inadvertent ground spoiler deployment in flight that could lead to increased flightcrew workload and loss of continued safe flight and landing. (f) Compliance Comply with this AD within the compliance times specified, unless already done. (g) Definitions (1) For purposes of this AD, a "5G C-Band mitigated airport" (5G CMA) is an airport at which the telecommunications companies have agreed to voluntarily limit their 5G deployment at the request of the FAA, as identified by an FAA Domestic Notice. (2) For purposes of this AD, a "radio altimeter tolerant airplane" is one for which the radio altimeter, as installed, demonstrates the tolerances specified in paragraphs (g)(2)(i) and (ii) of this AD, using a method approved by the FAA. (i) Tolerance to radio altimeter interference, for the fundamental emissions (3.7-3.98 GHz), at or above the power spectral density (PSD) curve threshold specified in figure 1 to paragraph (g)(2)(i) of this AD. Figure 1 to Paragraph (g)(2)(i)-Fundamental Effective Isotropic PSD at Outside Interface of Aircraft Antenna BILLING CODE 4910-13-P ER12JY23.031 (ii) Tolerance to radio altimeter interference, for the spurious emissions (4.2-4.4 GHz), at or above the PSD curve threshold specified in figure 2 to paragraph (g)(2)(ii) of this AD. Figure 2 to Paragraph (g)(2)(ii)-Spurious Effective Isotropic PSD at Outside Interface of Aircraft Antenna ER12JY23.032 (3) For purposes of this AD, a "non-radio altimeter tolerant airplane" is one for which the radio altimeter, as installed, does not demonstrate the tolerances specified in paragraphs (g)(2)(i) and (ii) of this AD. (h) Airplane Flight Manual (AFM) Revision for Non-Radio Altimeter Tolerant Airplanes: MMEL Restriction For non-radio altimeter tolerant airplanes, before further flight, revise the Limitations Section of the existing AFM to include the information specified in figure 3 to paragraph (h) of this AD. This may be done by inserting a copy of figure 3 to paragraph (h) of this AD into the existing AFM. Figure 3 to Paragraph (h)-AFM Revision for Non-Radio Altimeter Tolerant Airplanes: MMEL Restriction ER12JY23.033 (i) AFM Revision for Radio Altimeter Tolerant Airplanes: MMEL Restriction For radio altimeter tolerant airplanes, before further flight, revise the Limitations Section of the existing AFM to include the information specified in figure 4 to paragraph (i) of this AD. This may be done by inserting a copy of figure 4 to paragraph (i) of this AD into the existing AFM. Figure 4 to Paragraph (i)-AFM Revision for Radio Altimeter Tolerant Airplanes: MMEL Restriction ER12JY23.034 (j) Additional AD Provisions The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, Operational Safety Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the manager of the Operational Safety Branch, send it to the attention of the person identified in paragraph (k)(2) of this AD. Information may be emailed to: [email protected] . (2) Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office. (k) Additional Information (1) Refer to Transport Canada AD CF-2023-45, dated June 26, 2023, for related information. This Transport Canada AD may be found in the AD docket at regulations.gov under Docket No. FAA-2023-1407. (2) For more information about this AD, contact Brett Portwood, Continued Operational Safety Technical Advisor, COS Program Management Section, Operational Safety Branch, FAA, 3960 Paramount Boulevard, Lakewood, CA 90712-4137; phone: 817-222-5390; email: [email protected] . (l) Material Incorporated by Reference None. Issued on July 3, 2023. Michael Linegang, Acting Director, Compliance & Airworthiness Division, Aircraft Certification Service. [FR Doc. 2023-14770 Filed 7-7-23; 4:15 pm]BILLING CODE 4910-13-P

Related safety bulletins advice on the same designs, not orders

2021-09-16AIR-21-15R1 · Navigation System
2021-08-26AIR-21-15 · Navigation System
2014-11-06NM-15-02 · Cabin Equipment/Furnishings
2011-05-17NM-11-34 · Doors: Passenger/Crew Doors, Tensator Springs of the Door Actuator

Source: FAA Dynamic Regulatory System, airworthiness directives. The FAA's document is the authority; the register counts are this site's, from the FAA register of November 19, 2026. Connections as data: /graph/directive/2023-14-01.json · aircraft systems.

Aircraft

By kindModelsMakersEnginesFleetsWhat changed

Fly

Plan a flightAirportsLive mapRoutes and flightsFuels

Training and work

TrainingFlight schoolsGround schoolsPilot examinersMedical examinersJobs

Companies

DirectoryCharter operatorsFBOsRepair stationsClaim your listing

Safety and data

AccidentsRecords checkAnalyticsSAFxCHANGEThe graphAbout

Colours follow your device's light or dark setting.