The U.S. aircraft register, updated daily
FAA orders · airworthiness directive · historical

2018-18-05: Time limits/maintenance checks

FAA order 2018-18-05 is an airworthiness directive in force since October 5, 2018. The FAA's subject line: Time limits/maintenance checks. It names Aerospatiale/Aeritalia ATR 42, Atr-Gie Avions De Trnsp Region ATR42: about 22 aircraft on the U.S. register today across them, though an order usually covers particular versions or serial numbers rather than every one. System: other and general.

What it applies to as the FAA lists it

Kind of product
Aircraft
Makes
ATR - GIE Avions de Transport Régional
Models
ATR42-200, ATR42-300, ATR42-320
On this site
Aerospatiale/Aeritalia ATR 42 16 registered
Atr-Gie Avions De Trnsp Region ATR42 6 registered

Dates and paperwork

In force since
October 5, 2018
Published
August 31, 2018 (signed August 21, 2018)
Docket
FAA-2018-0391
Replaced by
2022-25-16
Status
Historical
The FAA's document
Read the order on the FAA's site

The FAA's summary their words, unchanged

We are adopting a new airworthiness directive (AD) for certain ATR-GIE Avions de Transport R[eacute]gional Model ATR42-200, -300, and -320 airplanes. This AD was prompted by a determination that more restrictive maintenance instructions and airworthiness limitations are necessary. This AD requires updating the maintenance or inspection program, as applicable, to incorporate new or more restrictive maintenance requirements and airworthiness limitations. We are issuing this AD to address the unsafe condition on these products.

The order itself the regulatory text, as published

Show the full text (6,975 characters)
Adoption of the Amendment Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows: PART 39--AIRWORTHINESS DIRECTIVES 0 1. The authority citation for part 39 continues to read as follows: Authority: 49 U.S.C. 106(g), 40113, 44701. Sec. 39.13 [Amended] 0 2. The FAA amends Sec. 39.13 by adding the following new airworthiness directive (AD): 2018-18-05 ATR-GIE Avions de Transport R[eacute]gional: Amendment 39-19384; Docket No. FAA-2018-0391; Product Identifier 2017-NM-165- AD. (a) Effective Date This AD is effective October 5, 2018. (b) Affected ADs This AD affects the ADs specified in paragraphs (b)(1), (b)(2), and (b)(3) of this AD. (1) AD 2000-17-09, Amendment 39-11883 (65 FR 53897, September 6, 2000) (``AD 2000-17-09''). (2) AD 2008-04-19 R1, Amendment 39-16069 (74 FR 56713, November 3, 2009) (``AD 2008-04-19 R1''). (3) AD 2015-26-09, Amendment 39-18357 (81FR 1483, January 13, 2016) (``AD 2015-26-09''). (c) Applicability This AD applies to ATR-GIE Avions de Transport R[eacute]gional Model ATR42-200, -300, and -320 airplanes, certificated in any category, with an original airworthiness certificate or original export certificate of airworthiness dated on or before October 17, 2016. (d) Subject Air Transport Association (ATA) of America Code 05, Time limits/ maintenance checks. (e) Reason This AD was prompted by a determination that more restrictive maintenance instructions and airworthiness limitations are necessary. We are issuing this AD to prevent reduced structural integrity of the airplane. (f) Compliance Comply with this AD within the compliance times specified, unless already done. (g) Maintenance or Inspection Program Revision Within 90 days after the effective date of this AD, revise the maintenance or inspection program, as applicable, to incorporate the information specifiedin the Airworthiness Limitations (ALS) and Certification Maintenance Requirements (CMR) sections of ATR ATR42- 200/-300/-320, Time Limits Document (TL), Revision 8, dated October 17, 2016. The initial compliance time for accomplishing the tasks is at the applicable times specified in the ALS and CMR sections of ATR ATR42-200/-300/-320, Time Limits Document (TL), Revision 8, dated October 17, 2016, or within 90 days after the effective date of this AD, whichever occurs later, except as specified in paragraph (h) of this AD. (h) Initial Compliance Times for Certain CMR Tasks For the CMR tasks listed in figure 1 to paragraph (h) of this AD, the initial compliance time for accomplishing the tasks is at the applicable time specified in the ALS and CMR sections of ATR ATR42-200/-300/-320, Time Limits Document (TL), Revision 8, dated October 17, 2016, or within the compliance time specified in figure 1 to paragraph (h) of this AD, whichever occurs later. [[Page 44465]] [GRAPHIC] [TIFF OMITTED] TR31AU18.000 (i) No Alternative Actions and Intervals After the maintenance or inspection program, as applicable, has been revised as required by paragraph (g) of this AD, no alternative actions (e.g., inspections) or intervals may be used unless the actions or intervals are approved as an alternative method of compliance (AMOC) in accordance with the procedures specified in paragraph (k)(1) of this AD. (j) Terminating Action for Certain ADs Accomplishing the actions required by this AD terminates all requirements of AD 2000-17-09, AD 2008-04-19 R1, and AD 2015-26-09 for ATR--GIE Avions de Transport R[eacute]gional Model ATR42-200, - 300, and -320 airplanes only. (k) Other FAA AD Provisions The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, International Section, Transport Standards Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the International Section, send it to the attention of the person identified in paragraph (l)(2) of this AD. Information may be emailed to: 9-ANM-116-AMOC-REQUESTS@faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office. (2) Contacting the Manufacturer: For any requirement in this AD to obtain corrective actions from a manufacturer, the action must be accomplished using a method approved by the Manager, International Section, Transport Standards Branch, FAA; or the European Aviation Safety Agency (EASA); or ATR-GIE Avions de Transport R[eacute]gional's EASA Design Organization Approval (DOA). If approved by the DOA, the approval must include the DOA-authorized signature. (l) Related Information (1) Refer to Mandatory Continuing Airworthiness Information (MCAI) EASA AD 2017-0221R1, dated December 15, 2017, for related information. This MCAI may be found in the AD docket on the internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2018-0391. (2) For more information about this AD, contact Shahram Daneshmandi, Aerospace Engineer, International Section, Transport Standards Branch, FAA, 2200 South 216th St., Des Moines, WA 980198; telephone and fax 206-231-3220. (m) Material Incorporated by Reference (1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51. (2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise. (i) ATR ATR42-200/-300/-320, Time Limits Document (TL), Revision 8, dated October 17, 2016. (ii) Reserved. (3) For service information identified in this AD, contact ATR- GIE Avions de Transport R[eacute]gional, 1 All[eacute]e Pierre Nadot, 31712 Blagnac Cedex, France; telephone +33 (0) 5 62 21 62 21; fax +33 (0) 5 62 21 67 18; email aircraft.com">continued.airworthiness@atr-aircraft.com; http://www.atr-aircraft.com. You may view this service information at the FAA, Transport Standards Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. (4) You may view this service information at the FAA, Transport Standards Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. (5) You may view this service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal-register/cfr/ibr-locations.html.

Related safety bulletins advice on the same designs, not orders

2015-04-20NM-15-14 · Propellers/Propulsors
2011-08-01NM-11-45 · Doors: Cargo/Baggage Doors
2011-02-03NM-11-19 · Indicating/Recording System Angle of Attack Sensors
2010-03-04NM-10-18 · Instruments: Redesigned Aileron Sensors for Flight Data Recorder
2010-01-07NM-10-13 · Navigation: Flight Management System

Source: FAA Dynamic Regulatory System, airworthiness directives. The FAA's document is the authority; the register counts are this site's, from the FAA register of October 7, 2026. Connections as data: /graph/directive/2018-18-05.json · aircraft systems.