The U.S. aircraft register, updated daily
the record · single-engine piston aircraft · Diamond Aircraft DA 40 · flight page

N673DA

Last heard October 18 at 9:13 am, at 7,950 feet, 4 miles west of Habersham County. Nothing newer has come from the network since; it may have landed out of the receivers' hearing.

This page checks the country picture for it every minute while it is open.

Took off —in the air when first heard October 18 at 8:38 am
Last heard …still in the air, or beyond the receivers' hearing October 18 at 9:13 am
Length
34 min
Distance
77 nm (89 miles)
Top altitude
7,975 ft
Fastest
146 knots (168 mph)
Positions heard
6

This flight is the one in progress (or the last one heard, if the aircraft flew beyond the receivers). Times are local to where the aircraft was.

Line colour: altitude Low 10,000 ft 25,000 ft 40,000 ft Start End

Altitude and speed through the flight

Move along the graph to read the altitude and speed at any moment.

Flights in the last 14 days

WhenFromToLengthDistanceTop altitudeFastest
October 18 at 8:38 am to 9:13 am in the air when first heard still in the air, or out of the network's hearing 34 min 77 nm 7,975 ft 146 kt

Show the last 56 days · A flight is a run of positions with no gap longer than twenty minutes; an airport is named when the aircraft was low and within five miles of it at that end.

Positions from the adsb.lol community network (open data). A distance is the sum of the straight lines between the positions heard, so it is a little short of the true track. Positions are kept in full for 7 days and at one point every five minutes after that, for 180 days. Map: OpenFreeMap, OpenMapTiles, OpenStreetMap contributors. For understanding where an aircraft went, not for flying.

The aircraft

Aircraft
Diamond Aircraft DA 40, built 2006
Kind
Single-engine piston aircraft, 4 seats
Operator
Dragonfly Aviation LLC
Registered in
Winder, GA
Transponder code
A8E729

The full register record, with its history and connections. Find it on the live map and follow it with its trail.