Special Conditions: ATR Model ATR-42-200/-300/-320/-500 and ATR- 72-102/-202/-212/-212A Airplanes; Seats With Non-Traditional, Large, Non-Metallic Panels
Special conditions are rules the FAA writes for one design when the standard certification rules do not cover something new about it. These were published July 28, 2016 for Atr Gie Avions de Transport Regional, covering the ATR-42-200, ATR42-500, ATR42-320, ATR42-300. System: cabin, seats and restraints.
What it applies to
- Applicant
- Atr Gie Avions de Transport Regional
- Makes
- ATR - GIE Avions de Transport R gional
- Models
- ATR-42-200, ATR42-500, ATR42-320, ATR42-300, ATR72-102, ATR72-202, ATR72-212A, ATR72-212
- On this site
- Aerospatiale/Aeritalia ATR 42 16 registered
Aerospatiale ATR 72 9 registered
Atr-Gie Avions De Trnsp Region ATR42 6 registered
Atr-Gie Avions De Trnsp Rgnl ATR 72 14 registered - Published
- July 28, 2016
- Effective
- July 28, 2016
- The FAA's document
- On the FAA's site
The FAA's summary their words, unchanged
These special conditions are issued for ATR Model ATR-42-200/- 300/-320/-500 and ATR-72-102/-202/-212/-212A airplanes. These airplanes will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport- category airplanes. This design feature is seats with non-traditional, large, non-metallic panels. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Source: FAA special conditions (final) from the Dynamic Regulatory System; the Federal Register carries the same notices.